Page 1 of 1

Stock Wheel/Suspension Dimensions 1958-1966

Posted: Sun Dec 28, 2014 8:02 pm
by Alan H. Tast
This post is to establish baseline reference dimensions critical for mounting non-original wheels/tires on 1958-1966 T-birds. The following dimensions are needed to begin "filling in the blanks." Additional dimensions for wheel well clearances will be added when obtained or provided.

1958-1960
Distance between wheel mounting faces/face of drum-to-face of drum
Front (wheels pointed forward)
Rear (i.e. overall axle width at face of drum)
Distance from face of rear axle brake drum to wheel opening inner lip
Distance from face of rear axle brake drum to fender skirt inner lip

1961-1963
Distance between wheel mounting faces/face of drum-to-face of drum
Front (wheels pointed forward)
Rear (i.e. overall axle width at face of drum)
Distance from face of rear axle brake drum to wheel opening inner lip
Distance from face of rear axle brake drum to fender skirt inner lip

1964
Distance between wheel mounting faces/face of drum-to-face of drum
Front (wheels pointed forward)
Rear (i.e. overall axle width at face of drum)
Distance from face of rear axle brake drum to wheel opening inner lip
Distance from face of rear axle brake drum to fender skirt inner lip

1965-1966
Distance between wheel mounting faces/face of drum-to-face of drum
Front (wheels pointed forward)
Rear (i.e. overall axle width at face of drum)
Distance from face of rear axle brake drum to wheel opening inner lip
Distance from face of rear axle brake drum to fender skirt inner lip

Section drawing showing 65-67 T-bird disc brake caliper/rotor/wheel
65-67 T-bird Disc Brake Caliper-Rotor-Wheel
65-67 T-bird Disc Brake Caliper-Rotor-Wheel

Section drawing showing rear wheelhouse and rear axle
Rear Wheelhouse-Axle
Rear Wheelhouse-Axle

Some additional info on determining wheel fitment:
Determining Vehicle Fitment
Determining Vehicle Fitment

Info on Wheels and Wheel Well Measurements:
Wheel Well Measurement
Wheel Well Measurement
Wheel Clearance
Wheel Clearance

And, for reference, wheel terminology:
Wheel Terminology Drawing
Wheel Terminology Drawing
Wheel Terminology
Wheel Terminology

Please post dimensions or email directly or PM me with them.

Re: Stock Wheel/Suspension Dimensions 1958-1966

Posted: Sun Aug 09, 2020 11:10 pm
by Alan H. Tast
Bringing this back up in search for dimensions. Also seeking confirmation of width of rear axles '58-'60s at wheel mounting surfaces and width of housings at mounting faces for backing plates.

Re: Stock Wheel/Suspension Dimensions 1958-1966

Posted: Mon May 08, 2023 2:44 pm
by Alan H. Tast
<bump> Still needing dimensions for stock suspension setups 1964-1966.