Clip on wire wheels…
Moderator: Joe Johnston
-
- Posts: 112
- Joined: Fri Aug 05, 2011 11:59 pm
Clip on wire wheels…
I am installing the two piece clip on wire wheel covers. What purpose does the rubber bumper piece serve? Saw a video on YouTube and the rubber bumper was not used by the installer due to the chrome ring would not seat flush against the rim and left a good size gap. Thanks in advance !
-
- Posts: 84
- Joined: Thu Feb 23, 2023 11:10 am
Re: Clip on wire wheels…
I used the rubber bumpers on mine and the covers sit flush.
-
- Posts: 112
- Joined: Fri Aug 05, 2011 11:59 pm
Re: Clip on wire wheels…
Ventport, I think the guy on YouTube that I referenced not using the rubber bumpers on the spring clips was somewhat incorrect. I wasn’t sure what the purpose of the rubber bumpers were used for, now I think why. One they may quiet the wire ring when driving and they provide a slight gap to prevent the ring from rubbing the white wall. I saw on one wheel that the ring was rubbing the white wall around the entire wheel. I’m hoping this is correct thinking. Your response made me look a little closer and install the rubber bumpers. Thanks !