M code Fuel Line

[CSavaglio]

Does anyone know if anybody is producing a preformed fuel pump to fuel rail fuel line for the 3x2 motors? I have a 4bbl 63 thunderbird but I have factory 6bbl on my 59 Galaxie that came from a later Galaxie (with the galaxie stepped carb pads, galaxie air cleaner, and galaxie carbs.. 2436/2347) but the fuel rail should be in the same location. I currently have one I formed myself, but it's not as cleanly done as the preformed one on my 63.

Chris

[Alan H. Tast]

I've gotten prebent lines from Right Stuff Tubing, Inline Tube and a few other places, but I can't remember the others off the top of my head as that was back in 2005-2006. A quick Google search for suppliers and catalogs should yield a few sources.

[CSavaglio]

The issue I'm finding is that everyone lists the 4bbl line but not the 6bbl...I'll reach out to the usual suspects and see if anyone is still doing it. I didn't see anything in the t-bird catalogs except the 4bbl one.

Thank you

[Jim Wulf]

Does anyone know if anybody is producing a preformed fuel pump to fuel rail fuel line for the 3x2 motors? I have a 4bbl 63 thunderbird but I have factory 6bbl on my 59 Galaxie that came from a later Galaxie (with the galaxie stepped carb pads, galaxie air cleaner, and galaxie carbs.. 2436/2347) but the fuel rail should be in the same location. I currently have one I formed myself, but it's not as cleanly done as the preformed one on my 63.

Chris

The correct 3/8" line is produced by Inline Tube.

https://www.inlinetube.com/collections/ ... d=SFUE6201

It's the same line for both 62 and 63.

[CSavaglio]

Perfect, thank you!