Howdy,
I've got the headers worked out, now I'm thinking about how to get fuel to the mighty 390... I've had a 750 Double Pumper, but I wanted something that had more wow factor. I consider some throttle body injectors, but the cost was over the moon. The injector carb is another option, but visually it doesn't appeal to me.
Has anyone used the 3 carb manifold set up? I'm sure it's tricky to set up, probably it doesn't put out any more performance, maybe less performance than the double pumper and I guess you would have to consider reliability.
I think it would be cool looking if it gave decent performance and a measure of reliability? Can anyone give a testimonial good or bad about the use of these?
Thanks,
Mitch
3 CARB MANIFOLD...
Moderator: redstangbob
Re: 3 CARB MANIFOLD...
Yes, Ford Motor Company offered a tri-power 390 in 1962 and 1963 Thunderbirds. These are the rare and prized M-code roadsters. If you collect all the parts from this setup, it will bolt on and fit under the hood of a 64-66 Thunderbird.
https://www.ebay.com/motors/blog/an-ext ... e-on-ebay/
https://www.ebay.com/motors/blog/an-ext ... e-on-ebay/
1966 Thunderbird Convertible (Emberglo / White-Emberglo)
Modified 428 - stroked, rollercam, aluminum top end, headers
Livermore, CA
Modified 428 - stroked, rollercam, aluminum top end, headers
Livermore, CA
Re: 3 CARB MANIFOLD...
Last tri power I saw for sale was about $2500. I myself would look at a fuel injected system. Try Fitech about $1400 or look a this thread http://fepower.net/simplemachinesforum/ ... ic=3815.45
Re: 3 CARB MANIFOLD...
Here's what I ended up with:
1. Holly 2 barrel carbs jetted to my engine requirements.
2. Progressive all Stainless Steel linkage
3. Heim bearing linkage where needed.
4. Thermal barrier applied to the underside of the manifold.
5. All threaded opening have been Helicoiled.
I furnished and made the S.S. fuel rail and brackets.
https://photos.app.goo.gl/vnfrTXGjRuPUoju59
1. Holly 2 barrel carbs jetted to my engine requirements.
2. Progressive all Stainless Steel linkage
3. Heim bearing linkage where needed.
4. Thermal barrier applied to the underside of the manifold.
5. All threaded opening have been Helicoiled.
I furnished and made the S.S. fuel rail and brackets.
https://photos.app.goo.gl/vnfrTXGjRuPUoju59
Re: 3 CARB MANIFOLD...
Looks awesome. With that adapter on the thermostat housing, did you do away with the surge tank?
~Steve
~Steve
Re: 3 CARB MANIFOLD...
That is one sweet setup!
Scott
Scott
1964 Coupe Wimbledon white/Rangoon Red w/black int. Owned for 42 years. It was my folks car before that (second owners). VTCI # 12013.
-
- Posts: 6
- Joined: Sun Feb 24, 2019 4:41 am
Re: 3 CARB MANIFOLD...
Very nice what did it cost you to make that setupgravelman wrote: ↑Tue Nov 06, 2018 1:09 pm Here's what I ended up with:
1. Holly 2 barrel carbs jetted to my engine requirements.
2. Progressive all Stainless Steel linkage
3. Heim bearing linkage where needed.
4. Thermal barrier applied to the underside of the manifold.
5. All threaded opening have been Helicoiled.
I furnished and made the S.S. fuel rail and brackets.
https://photos.app.goo.gl/vnfrTXGjRuPUoju59
Re: 3 CARB MANIFOLD...
1964 Coupe Wimbledon white/Rangoon Red w/black int. Owned for 42 years. It was my folks car before that (second owners). VTCI # 12013.
Re: 3 CARB MANIFOLD...
Gonna need a hole in the hood for that one.RedBird64 wrote: ↑Thu Feb 28, 2019 10:22 pm Wow factor: https://www.jegs.com/i/Speedmaster/746/ ... _oQAvD_BwE
Worth it, though.