If you try to remove the A/C clutch from the compressor, you run into the problem of the shaft being buried deep inside the clutch which prevents the puller from reaching it.
After looking around the garage a bit, I figured a small socket would work as a spacer, so I put a 3/8" short socket in the hole.
Attach a 6" wheel puller with the arms in the lower holes. A few cranks with a large wrench just suddenly popped the clutch off.
Now it is off to Classic Air for a rebuild.
Quick tip-Removing A/C clutch
Moderator: redstangbob
Quick tip-Removing A/C clutch
Tom in Albuquerque
61-63 Forum Moderator
1962 Corinthian White Hardtop, Medium Chestnut Metallic #89 Leather, A/C, P/W
2003 Premium Torch Red/Performance White HT, Partial Accent Interior, 1 of 47.
Past T-Bird: 1960 Convertible, 1974-1978
61-63 Forum Moderator
1962 Corinthian White Hardtop, Medium Chestnut Metallic #89 Leather, A/C, P/W
2003 Premium Torch Red/Performance White HT, Partial Accent Interior, 1 of 47.
Past T-Bird: 1960 Convertible, 1974-1978
Re: Quick tip-Removing A/C clutch
Tom, isn't the clutch threaded to accept a push off bolt? It has been a while but I thought the last time I took one off I threaded a 5/8-11 or 3/4- 10 machine bolt into the clutch after removing the bolt and washer that holds it onto the shaft. about 1/2 a turn and it popped right off. Maybe not all clutches are made that way.
Bill Clark
Bel Air, Maryland
1957 F code
2005 50th anniversary
1963 Avanti R2
1956 GMC Suburban Carrier pickup
1966 Corvair Corsa Turbo
Prior Birds
1963 M code SR
1964 Convertable
1965 convertible
Bel Air, Maryland
1957 F code
2005 50th anniversary
1963 Avanti R2
1956 GMC Suburban Carrier pickup
1966 Corvair Corsa Turbo
Prior Birds
1963 M code SR
1964 Convertable
1965 convertible
- redstangbob
- Posts: 3604
- Joined: Fri May 02, 2008 4:06 pm
- Location: 40 miles east of Wixom
Re: Quick tip-Removing A/C clutch
Yup, I was going to post a pic when I get back after the holiday. I call them jack screwsisn't the clutch threaded to accept a push off bolt?
It's gonna be cool when it's done
And now it's really cool !!
59 convertible
58 convertible
65 hardtop
And now it's really cool !!
59 convertible
58 convertible
65 hardtop
Re: Quick tip-Removing A/C clutch
Looks to me like the pulley in the picture has the internal thread, one of my pullers sets comes with jack bolts for this type pulley.
Jim Mills
VTCI # 8071
VTCI 1964-66 Technical Editor
2002 Thunderbird
1965 Convertible
1962 Convertible (in progress)
1959 Ford Retractable HT
Many parts cars
VTCI # 8071
VTCI 1964-66 Technical Editor
2002 Thunderbird
1965 Convertible
1962 Convertible (in progress)
1959 Ford Retractable HT
Many parts cars
Re: Quick tip-Removing A/C clutch
.Tom, isn't the clutch threaded to accept a push off bolt? It has been a while but I thought the last time I took one off I threaded a 5/8-11 or 3/4- 10 machine bolt into the clutch after removing the bolt and washer that holds it onto the shaft.
Yes, it is threaded. However, when it is New Year's eve at 7pm and you don't have a bolt that big, the socket works like a champ. Sometimes you have to work with what you have. I had a wheel puller but no bolt. Thus I improvised. I'm just trying to show what worked for me in a matter of five minutes.
Tom in Albuquerque
61-63 Forum Moderator
1962 Corinthian White Hardtop, Medium Chestnut Metallic #89 Leather, A/C, P/W
2003 Premium Torch Red/Performance White HT, Partial Accent Interior, 1 of 47.
Past T-Bird: 1960 Convertible, 1974-1978
61-63 Forum Moderator
1962 Corinthian White Hardtop, Medium Chestnut Metallic #89 Leather, A/C, P/W
2003 Premium Torch Red/Performance White HT, Partial Accent Interior, 1 of 47.
Past T-Bird: 1960 Convertible, 1974-1978