Intake manifold flange
Moderator: redstangbob
-
- Posts: 89
- Joined: Mon Aug 20, 2018 10:01 pm
Intake manifold flange
I have been thinking about going with the new holley super sniper kit. But I have a question about the intake manifold flange. I was wondering if anyone knew what the flange number is. The holley kit uses a 4150 flange and I'm just wondering if that would bolt up or I will have to buy the edelbrock intake to go with it. Thanks in advance.
Re: Intake manifold flange
I'll be doing the same bery soon.
Yes, the 4150 will work fine!
Are you going to spring for the Hollley distributor as well?
Scott
Yes, the 4150 will work fine!
Are you going to spring for the Hollley distributor as well?
Scott
1964 Coupe Wimbledon white/Rangoon Red w/black int. Owned for 42 years. It was my folks car before that (second owners). VTCI # 12013.
Re: Intake manifold flange
BTW, for anyone installing EFI (or any new carb) who wants to keep their original throttle rod/linkage, you will also need Holley P/N 20-7.
https://www.holley.com/products/fuel_sy ... parts/20-7
https://www.holley.com/products/fuel_sy ... parts/20-7
1964 Coupe Wimbledon white/Rangoon Red w/black int. Owned for 42 years. It was my folks car before that (second owners). VTCI # 12013.
-
- Posts: 89
- Joined: Mon Aug 20, 2018 10:01 pm
Re: Intake manifold flange
I will be doing a full ignition setup from Holley with time. I would like to rebuild my motor and put a torque storm supercharger on the motor. But for now I am going to stick with the stock ignition till I can get more money saved up.
Re: Intake manifold flange
Pretty sure I will do the dist as well but first I'm going to get it running with the Sniper and let it "learn".
Scott
Scott
1964 Coupe Wimbledon white/Rangoon Red w/black int. Owned for 42 years. It was my folks car before that (second owners). VTCI # 12013.